Steelwrist Tiltrotators

Steelwrist offer a complete product offering for modern excavators. All sizes have Front Pin Lock technology. Our tiltrotators have a low building height, high tilt angle and an unbeatable relationship between strength and weight thanks to steel casted components.

Steelwrist_TiltrotatorX26_cmyk_h1000

Tiltrotators for Excavators from 2.5 to 33 ton

It is already a must for excavator owners and contractors in European markets, to mount a tiltrotator to the excavator. Over 90% of all excavators in Sweden between 2.5 and 33 tonnes are now equipped with a tiltrotator.

  • The most compact and optimised tiltrotator on the market
  • 45 ° tilt angle for greater flexibility
  • Front Pin Lock as standard

Fill out the form for more information

Trusted By
Caterpillar Logo
Volvo CE Logo
john-deere-logo
hitachi-logo
Komatsu Logo

Productivity speaks for itself

The more complicated the job, the higher the productivity when using a tiltrotator; a well known fact. Experienced operators usually estimate the productivity improvement to between 40 and 50% depending on the type of job.

Tiltrotators for safety and efficiency

steelwrist_tiltrotator_a

The most compact and optimised tiltrotator in the market

Steelwrist offers the most modern products for excavators and backhoe loaders up to 33 tons. We make products that are simple, safe and effective to use in your daily work.

Specific product benefits

Thanks to a focus on steel molded components, we offer compact tiltrotators with low building height and low weight that gives you optimized digging geometry and the best fuel efficiency.

  • Cast steel in all major components for the best ratio strength to weight
  • The lowest building height
  • 45 ° tilt angle for greater flexibility – on all tiltrotators
  • Double acting tilt cylinders with check valve as option
  • Vertical tilt cylinders that allow digging in narrow trenches
  • Grease lubrication for longer life and possible to connect to your central lubrication system
  • Six channel swivel with high flow for a flexible use with your tiltrotator
steelwrist_tiltrotator_b
Steelwrist Front Pin Lock

Front Pin Lock Standard

Front Pin lock is standard on all Steelwrist tiltrotators and quick couplers.

A secure solution that works for all excavators.

Extended Warranty

With simple means and regular maintenance, you can easily extend the warranty on your tiltrotator. A few important steps:

  • Register your product at the time of purchase
  • Service your product as instructed in the service manual
  • Two check ups by a specialist during the first two years

Simple and effective for you!

Steelwrist_2year_warranty
steelwrist_tiltrotator_c

Gripper cassette - possible retrofit

A fantastic tool and when you have got used to it you will never go back to working without. Casted four finger gripper for best durability and grip.

  • Large opening
  • Full closure
  • Possible to retrofit

DATATAG theft protection

Protect your tiltrotator against theft and get better insurance conditions with DATATAG marking. 

Steelwrist Datatag

What Our Clients Say

HAC_100

Harley and Shannon Allen

Harley Allen Contracting Ltd

We are a small earthworks business based in the Wairarapa subcontracting to the contractor (Fulton hogan) on the council road maintenance contract. We currently run a 140w wheel Doosan excavator in our fleet equipped with the Steelwrist x18.

The Steelwrist looked to be a huge benefit to our little operation. And what an investment it has turned out to be, every day it plays its part in our work sometimes in huge ways others in minor ways, but it’s always there and we are always using it, it has given the wheel digger (often recognised as a machine with limited access and position abilities) the ability to perform tasks from safe working platforms with the bucket offset to do the tasks, it’s much like having a 5 tonner attached to the end of the 14s boom!

The attachment is built to top-quality standard and the fit-out from Synergy Equipment looks like the machine came equipped with it out of the factory.

The Synergy team is super professional and efficient giving us a dam good feeling about back up service as well as happy to answer any questions we may have. Both the Steelwrist and the Synergy Service is a massive asset to have working with our business.

Cheers, Harley and Shannon!

What Our Clients Do 

Trusted By
Caterpillar Logo
Volvo CE Logo
john-deere-logo
hitachi-logo
Komatsu Logo

Synergy Equipment is the New Zealand Authorised Dealer for Steelwrist
0800 587 054

With offices throughout New Zealand, our experienced team are always on hand to offer comprehensive after-sales support, product training and servicing, giving you the confidence and skills to get the best out of your equipment.
Our product range is extensive and always growing.